Yamaha RX-V1300 Remote Control in Zone, ■Special considerations when using DTS software, English, For CDs encoded with DTS, 3 Press u/ dto select “Zone2”

■Special considerations when using DTS software

The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to the second room, you will only be able to hear the digital noise sound that could damage your speakers.

Due to this characteristic of DTS encoded discs, the following considerations and adjustments need to be made.

For LDs or DVDs encoded with DTS

Only 2-channel analog audio signals may be sent to the second room, as follows:

•LDs

Set your LD player’s left and right outputs to the analog soundtrack.

•DVDs

Use the disc menu to set the DVD player’s mixed 2- channel left and right audio outputs to the PCM or Dolby Digital soundtrack.

For CDs encoded with DTS

DO NOT USE the Zone 2 feature for CDs encoded with DTS to avoid unexpected noise.

Remote Control in Zone 2

In the second room (Zone 2), the supplied remote control can be used for the Zone 2 remote control. You can select the input source and control the component which is located in the main room directly from the second room regardless of the listening condition in the main room.

1 Repeat steps 1 and 2 of the procedure in “Setting the Manufacturer Code” on page 45.

2 Press j / i to select “L:AMP”.

TV VOL

CH	TV MUTE	CH
–	TV MUTE	+
–	SELECT	+
		PRESET
	TV VOL
	–

3 Press u/ dto select “Zone2”.

TV VOL

CH	TV MUTE	CH
–	TV MUTE	+
–	SELECT	+
PRESET		PRESET
	TV VOL
	–

4 Press LEARN to complete the Zone 2 setup.

LEARN

ZONE 2

5 Press SELECT kto display “ZONE2” in the display window.

SELECT

6 Press an input selector button to select the input source you want to watch or listen to in the second room.

The display window shows “2: name of selected input” if the remote control is in the Zone 2 mode.

A	PHONO	TUNER	CD
V-AUX	CBL/SAT	MD/TAPE	CD-R
D-TV/LD	VCR 1	VCR2/DVR	DVD

Note

•The SYSTEM POWER, STANDBY and MUTE button on the remote control works for the second room. However Zone 2 volume cannot be adjusted with the remote control. Use the control on the amplifier in the second room.

7 You can control the component by using the component control area buttons.

REC
		AUDIO	+
DISC SKIP			+
			VOL
			–
LEVEL	+	SET MENU	MUTE
TITLE	+	MENU
TV INPUT	TV VOL	A/B/C/D/E
TV INPUT		A/B/C/D/E
CH	TV MUTE	CH
–	SELECT	+
PRESET		PRESET
TEST	TV VOL	ON SCREEN	STEREO
	TV VOL
RETURN	–	DISPLAY
			EFFECT
HALL	CHURCH	JAZZ CLUB	ROCK
HALL	CHURCH	JAZZ CLUB	CONCERT
1	2	3	4
ENTER-	MUSIC	TV	MOVIE
TAINMENT	VIDEO	THEATER	THEATER 1
5	6	7	8
MOVIE	/DTS		EX/ES
THEATER 2	SUR.	SELECT	EX/ES
9	10	11	12
	0	+10	CHP/INDEX

8 Press SELECT k/ n to exit from the Zone 2 mode.

SELECT

POWERPOWER

OPERATION	ADVANCED

English