Yamaha RX-V1300 ■ LIVENESS, Control Range 0 –, Control Range 0 –, Control Range 0.1 –, Control Range 0 –10, Control Range 0.1 –, Control Range 1 – 49 msec

		DIGITALSOUNDSOUNDFIELDFIELDPROGRAMPARAMETERPARAMETERDESCRIPTIONSEDITI G
■ LIVENESS		Control Range 0 – 10
Function:	This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the
	early reflections decay.
Description:	The early reflections of a sound source decay much faster in a room with acoustically absorbent wall
	surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces
	is referred to as “dead”, while a room with highly reflective surfaces is referred to as “live”. The
	LIVENESS parameter lets you adjust the early reflection decay rate, and thus the “liveness” of the
	room.

Source Sound

								Live
	Level		Dead	Level		Level
			Time
					Time			Time
	Sound Source
		Small Reflected					Large
		Sound					Reflected Sound
		Small value = 0					Large value = 10
■ S. DELAY (Surround Delay)					Control Range 0 – 49 msec (The range
					depends on the signal format.)
Function:	This parameter adjusts the delay between the direct sound and the surround sound.
■ S. INIT. DLY (Surround Initial Delay)							Control Range 1 – 49 msec
Function:	This parameter adjusts the delay between the direct sound and the first reflection on the surround side
	of the sound field. You can only adjust this parameter when at least two front channels and two rear
	channels are used.
■ S. ROOM SIZE (Surround Room Size)							Control Range 0.1 – 2.0
Function:	This parameter adjusts the apparent size of the surround sound field.
■ S. LIVENESS (Surround Liveness)								Control Range 0 –10
Function:	This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
■ RC. INIT. DLY (Rear Center Initial Delay)							Control Range 1 – 49 msec
Function:	This parameter adjusts the delay between the direct sound and the first reflection in the rear center
	sound field.
■ RC. ROOM SIZE (Rear Center Room Size)							Control Range 0.1 – 2.0
Function:	This parameter adjusts the apparent size of the rear center sound field.
■ RC. LIVENESS (Rear Center Liveness)								Control Range 0 – 10
Function:	This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.

INFORMATION ADDITIONAL

English

73