Yamaha RX-V1400 Clearing function sets, Clearing individual functions, ■Clearing a learned function, English, ADVANCED, OPERATION, 5Press LEARN again to exit

Clearing function sets

You can clear all changes made in each function set, such as learned functions, renamed source names and setup manufacturer codes.

1Press CLEAR by using a ballpoint pen or similar object.

CLEAR

y

Complete each of the following steps in 30 seconds. Other wise, the learning mode will be automatically canceled. In this case, press CLEAR again.

REMOTE CONTROL FEATURES

Clearing individual functions

■Clearing a learned function

You can clear the function learned in a certain programmed button in each area.

1Press an input selector button to select the source component containing the function you want to clear.

The selected component name appears in the display

window.

PHONO	TUNER	CD	MULTI CH IN
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

2Press u / d to select the clear mode.

L:DVD (L: name of a component)

Clears all learned functions in the respective component control area. Press an input selector button to select the component.

L:AMP Clears all learned functions for this unit’s control area.

L:ALL Clears all learned functions. RNAME Clears all renamed source names.

FCTRY Clears all remote functions and returns the remote to the factory settings.

3Press and hold CLEAR again for about 3 seconds.

“C:OK” appears in the display window.

CLEAR

Note

“C:NG” appears in the display window if the operation is unsuccessful. In this case, start over from step 2.

4Press CLEAR to exit from the clearing mode.

Once you have cleared a learned function for a button, the button reverts to the factory setting.

CLEAR

Note

“ERROR” appears in the display window under the following circumstances:

–When a button other than the cursor is pressed.

–When more than one button is pressed at once.

2Press LEARN using a ballpoint pen or similar object.

“LEARN” and the selected component name appear alternately in the display window.

LEARN

y

Complete each of the following steps in 30 seconds. Otherwise the learning mode will be automatically canceled. In this case, press LEARN again.

3Press and hold CLEAR using a ballpoint pen or similar object, then press the button you want to clear for about 3 seconds.

“C:OK” appears in the display window.

TRANSMIT		RE–NAME CLEAR	LEARN
SYSTEM
POWER	STANDBY	SLEEP	INPUT MODE
PHONO	TUNER	CD	MULTI CH IN
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

When you clear a learned function, the button reverts to the factory setting (or to the manufacturer setting if you have set manufacturer codes).

4Repeat step 3 to clear other learned functions.

5Press LEARN again to exit.

OPERATION ADVANCED

English

63