Yamaha RX-V2200 CONNECTIONS, Before Connecting Components, Connecting Video Components, ■About the video jacks, ■VIDEO AUX jacks (on the front panel)

CONNECTIONS

Before Connecting Components

CAUTION

Never connect this unit and other components to mains power until all connections between components have been completed.

•Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components require different connection methods and have different jack names. Refer to the operation instructions for each component to be connected to this unit.

•When you connect other YAMAHA audio components (such as a tape deck, MD recorder and CD player or changer), connect them to the jack with the same number labels as !, #, $ etc. YAMAHA applies this labeling system to all its products.

•After you have completed all connections, check them again to make sure they are correct.

Connecting Video Components

■About the video jacks

There are three types of video jacks. Video signals input through the VIDEO jacks are the conventional composite video signals. Video signals input through the S VIDEO jacks are separated into luminance (Y) and color (C) video signals. The S-video signals achieve high-quality color reproduction. Video signals input through the COMPONENT VIDEO jacks are separated into luminance (Y) and color difference (PB/CB, PR/CR) video signals. The jacks are also separated into three for each signal. The description of the component video jacks may be different depending on the component (e.g. Y, CB, CR/Y, PB, PR/Y, B-Y, R-Y etc.). Component video signals provide the best quality in picture reproduction.

If your video component has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output jack on your video component to the S VIDEO jack or connect the component signal output jacks on your video component to the COMPONENT VIDEO jacks.

VIDEO		COMPONENT VIDEO
S VIDEO	VIDEO	PR/ CR	PB/ CB	Y

S VIDEO	VIDEO jack COMPONENT
jack	(composite) VIDEO jacks

y

•Each type of video jack works independently. Signals input through the composite video, S-video and component jacks are output through the corresponding composite video, S-video, and component jacks, respectively.

•You can designate the input for the COMPONENT VIDEO A and B jacks according to your component by using “7 I/O ASSIGNMENT” on the SET MENU (see pages 61 and 62 for details).

Notes

•Use a commercially available S-video cable when connecting to the S VIDEO jack, and commercially available video cables when connecting to the COMPONENT VIDEO jacks.

•When you are using the COMPONENT VIDEO jacks, check the details in the owner’s manual that came with the component being connected.

■VIDEO AUX jacks (on the front panel)

S VIDEO	VIDEO	L	AUDIO R OPTICAL
		VIDEO AUX
S	V	L	R	O

OPTICAL OUT

AUDIO OUT R

AUDIO OUT L

VIDEO OUT

S VIDEO OUT

These jacks are used to connect any video input source such as a game console and a camcorder to this unit.

Game console or camcorder

14