Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha RX-V2200 ZONE, Zone 2 Connections, ■Example of a system configuration and connections

1 88

Download 88 pages, 2.09 Mb

ZONE 2

You can make up a multi-room audio-video system with this unit. This feature enables you to set this unit to reproduce separate input sources in the main room and second room (Zone 2) with the supplied remote control in the second room.

Only analog signals are sent to the second room. For any source you want to listen to in the second room, you must connect the analog output jack from the source to the corresponding analog input jack on this unit.

Zone 2 Connections

To use the multi-room functions of this unit, you need the following additional equipment:

•An infrared signal receiver in the second room

•An infrared emitter in the main room

This emitter transmits the infrared signals from the remote control in the second room to the main room (for example, to a CD player or LD player).

•An amplifier and speakers for the second room

•A video monitor for the second room

OUT		IN		OUT		IN			REMOTE
OUT		IN		OUT		IN		CONTROL OUT

This unit

y

•Since there are so many ways to connect and use this unit in a multi-room installation, we recommend that you consult with the nearest authorized YAMAHA dealer or service center for the Zone 2 connections which will best meet your requirements.

•Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. Up to 6 YAMAHA components can be connected as shown.

■Example of a system configuration and connections

		ZONE 2 VIDEO OUT
Main room		ZONE 2 AUDIO OUT
Main room		Second room
		Amplifier Video
		monitor
DVD player
(or other component)	This unit	Remote control
DVD INPUT
		Infrared signal
		receiver
Infrared emitter

REMOTE CONTROL OUT

REMOTE CONTROL IN

Notes

•When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2 volume with the control on the amplifier in the second room.

•DO NOT USE the Zone 2 feature for CDs encoded with DTS to avoid unexpected noise.

68

Contents

IMPORTANT SAFETY INSTRUCTIONS I CAUTION CAUTION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT III CAUTION CONTENTS FEATURES GETTING STARTED Checking the Package Contents Installing Batteries in the Remote Control CONTROLS AND FUNCTIONS Front Panel qREC OUT/ZONE wSTEREO/EFFECT eA/B/C/D/E ■Opening and closing the front panel door Remote Control Using the Remote Control Front Panel Display 1 Processor indicators Rear Panel SPEAKER SETUP Speakers to Be Used Speaker Placement Connecting the Speakers ■SUBWOOFER jack Notes ■IMPEDANCE SELECTOR switch WARNING CONNECTIONS Before Connecting Components Connecting Video Components Page Connecting Audio Components Page Connecting to an External Amplifier Connecting an External Decoder Connecting the Power Supply Cords Turning on the Power ON-SCREENDISPLAY (OSD) Selecting the OSD Mode OSD Modes P01 CONCERT HALL SPEAKER MODE SETTINGS Summary of SPEAKER SET Items 1A through 1F ADJUSTING THE SPEAKER OUTPUT LEVELS Before You Begin SUR.) TEST DOLBY SUR BASIC PLAYBACK 5 Start playback or select a broadcast station on the source component 6 Adjust the volume to the desired output level 7 Select a DSP program if desired ■BGV (background video) function ■To mute the sound Press MUTE on the remote control ■When you have finished using this unit Input Modes and Indications Selecting a Sound Field Program Selecting PRO LOGIC or Neo: Virtual CINEMA DSP SILENT CINEMA DSP DIGITAL SOUND FIELD PROCESSING (DSP) Understanding Sound Fields Hi-FiDSP Programs CINEMA-DSP Sound Design of CINEMA-DSP ■Dolby Digital/DTS + DSP sound field effect ■Dolby Digital Matrix 6.1/DTS ES + DSP sound field effect ■Dolby Pro Logic + DSP sound field effect ■ Dolby Pro Logic /DTS Neo: CINEMA-DSPPrograms Spectacle Sci-Fi Adventure General ■For audio-videosources in 2-channel:No. 6 to Game TV SPORTS MONO MOVIE TUNING Connecting the Antennas Automatic and Manual Tuning Presetting Stations ■Manually presetting stations 1 Tune in to a station A A AM 576 kHz 2 Press MEMORY (MAN’L/AUTO FM) C :AM 576 kHz Tuning in to a Preset Station Exchanging Preset Stations BASIC RECORDING REMOTE CONTROL FEATURES Control Area Setting the Manufacturer Code Programming a New Remote Control Function (Learn Feature) Using the Macro Feature ■Operating the macro 1 Set MACRO ON/OFF to ON 2 Press a macro button ■Programming a macro 1 Press MACRO by using a ballpoint pen or similar object Display Window Clearing Learned Functions and Setup Manufacturer Codes Clearing a Learned Function or Macro 4 Press MACRO again to exit from the clearing mode ■SOURCE SELECT k / n ■OPTN (option) area ■Zone 2 feature Each Component Control Area Operating a TV/digital TV ■Operating an LD player (D-TV/LDarea) ■Operating a CD player (CD area) ■Operating a CD recorder (CD-Rarea) or an MD recorder (MD/TAPE area) ■Operating a tape deck (MD/TAPE area) ■Operating a tuner (TUNER area) ■Operating the component set in Å or ı SET MENU Adjusting the Items on the SET MENU SET MENU 1/4 2 LOW FRQ TEST 1SPEAKER SET (speaker mode settings) 1A CENTER SP 1B MAIN SP 1C REAR L/R SP 1D REAR CT SP 1E LFE/BASS OUT 2 LOW FRQ TEST 1F MAIN LEVEL 4HP TONE CTRL (headphone tone control) 4 HP TONE CTRL 5CENTER GEQ (center graphic equalizer) 5CENTER GEQ 5 CENTER GEQ 6 INPUT RENAME 6 INPUT RENAME 7 I/O ASSIGNMENT 7A CMPNT-VINPUT 7B OPTICAL OUT 8INPUT MODE (initial input mode) 8INPUT MODE 9 PARAM. INI 10 LFE LEVEL 10 LFE LEVEL 11 D-RANGE(dynamic range) 11 D-RANGE 12 SP DELAY TIME 12 SP DELAY TIME 13DISPLAY SET 13 DISPLAY SET 14 MEMORY GUARD 14 MEMORY GUARD ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS SLEEP TIMER Setting the Sleep Timer Canceling the Sleep Timer ZONE Zone 2 Connections Remote Control in Zone SOUND FIELD PROGRAM PARAMETER EDITING What is a sound field Sound Field Program Parameters Changing Parameter Settings P05 ROCK CONCERT Resetting a Parameter to the Factory-setValue DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS ■ LIVENESS Control Range 0 – ■ S. DELAY (Surround Delay) Control Range 0 – 49 msec (The range depends on the signal format.) ■ REV. TIME (Reverberation Time) Control Range 1.0 – 5.0 sec ■ REV. DELAY (Reverberation Delay) Control Range 0 – 250 msec ■ REV. LEVEL (Reverberation Level) For 6ch Stereo ■ CT LEVEL (Center Level) Control Range 0 – 100 % ■ RL LEVEL (Rear Left Level) ■ RR LEVEL (Rear Right Level) TROUBLESHOOTING Page Page ■Tuner ■Remote control Refer to page GLOSSARY ■Virtual CINEMA DSP ■S VIDEO signal ■Component video signal ■PCM (Linear PCM) ■Sampling frequency and number of quantized bits SPECIFICATIONS