How to Connect:

Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.

Caution

Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or speakers.

To connect to the MAIN SPEAKERS terminals

<U.S.A., Canada, Australia, China and General models

 

 

 

only>

Red: positive (+)

 

 

Banana Plug connections are also possible. Simply insert the

Black: negative (–)

 

 

Banana Plug connector into the corresponding terminal.

 

2

1 Unscrew the knob.

 

 

2 Insert the bare wire.

 

1

 

 

 

[Remove approx. 5mm

 

 

 

 

 

 

(1/4”) insulation from

 

 

3

the speaker wires.]

 

 

3 Tighten the knob and

 

 

 

 

 

 

secure the wire.

 

English

To connect to the REAR and CENTER SPEAKERS terminals

Red: positive (+)

Black: negative (–)

13

2

1Press the tab.

2Insert the bare wire. [Remove approx. 5mm (1/4”) insulation from the speaker wires.]

3Release the tab and secure the wire.

11