Applying a digital sound field processor (DSP) effect to an audio source

 

l6

 

20

 

l2

28

 

8

40

 

4

60

 

2

 

 

0

 

–dB

2

2

English

Press the component selector button AMP<TUNER> on the remote control transmitter.

1 Follow steps 1 to 6 of the procedure shown in “TO PLAY A SOURCE” on page 22.

2 Select a program that is suitable for the source.

PRO LOGIC

ENHANCED

PRO LOGIC

The selected mode indicator lights in the display.

3 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the descriptions on pages 38 and 39.)

Notes

●Program selection can be made to individual input sources. Once you select a program, it is linked with the input source selected at that time. So, the next time you select the input source, the same program is automatically recalled.

●If you prefer to cancel the DSP, press the EFFECT button. The sound will be the normal 2-channel stereo without surround sound effect.

●When CONCERT VIDEO, MONO MOVIE, TV SPORTS, DISCO, ROCK CONCERT or CONCERT HALL is selected, no sound is heard from the center speaker.

●When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the rear speakers.

●When this unit’s Dolby Pro Logic Surround decoder is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE control, the relationship between the center and rear channels may produce an unnatural effect.

●To select a DSP program on the remote control transmitter, first turn the DSP on so that a program name lights up in the display by pressing the EFFECT button. Next, select a desired DSP program by pressing the PRG+ or PRG– operation buttons.

37