~Component selector

Press the button for the component you want to control with the remote control transmitter. (The proper code must be set for your component. See “SETUP CODES” on page 41.)

When the component selector has been pressed, the remote control transmitter is set to operate that component.

ŸPOWER /I

When you have preset the code for a YAMAHA component, this button switches between the power on and standby mode. When you have preset the code for another manufacturer’s component, this button turns on that component if it has a remote control transmitter with a power button.

*Functions only when the component selector button AMP<TUNER>, TAPE/MD, CD, DVD/LD or DVD MENU has been pressed.

!TEST

Press this button to output the test tone for each speaker.

*Functions only when the component selector button AMP<TUNER> has been pressed.

MUTE

Press this button to mute the sound.

@VOLUME

These buttons are used to adjust the volume. : Turns up the volume.

: Turns down the volume.

¤SLEEP

This button is used to set the SLEEP timer.

#PRG+, PRG–

These buttons are used to select a DSP program.

*Function only when the component selector button AMP<TUNER> has been pressed.

Indicator

This flashes in red when a button on the remote control transmitter is pressed. When it flashes rapidly several times, press the selected button again.

$Input selector (1 to 7)1)/ Numeric buttons2)

1)These buttons are used to select the program source to be played.

*Function only when the component selector button AMP<TUNER>, TAPE/MD, CD or DVD/LD has been pressed.

2)These buttons are used to select the menu or channel.

*Function only when the component selector button DVD MENU, VCR, CBL/DBS or TV has been pressed.

EFFECT1)/ CLEAR2)/ +1003)

1)This button is used to switch the DSP program on or off.

*Functions only when AMP<TUNER>, TAPE/MD, CD, DVD/LD, VCR or TV on the component selector has been pressed.

2)This button is used to clear the settings.

*Functions only when the component selector button DVD MENU has been pressed.

3)This button is used to select the channel.

*Functions only when the component selector button CBL/ DBS has been pressed.

%ENTER1)/ +102)/ A/B/C/D/E3)

1)This button is used to enter the channel.

*Functions only when the component selector button VCR, CBL/DBS or TV has been pressed.

2)This button is used to select the menu.

*Functions only when the component selector button DVD MENU has been pressed.

3)This button is used to select a group of presets.

*Functions only when the component selector button AMP <TUNER> has been pressed.

DISC SKIP +/–1)/ CH +/–2) / PRESET +/–3)

1)These buttons are used to skip to the next or previous disc.

*Function only when the component selector button CD, DVD/LD or DVD MENU has been pressed.

2)These buttons are used to select the next or previous channel.

*Function only when the component selector button VCR, CBL/DBS or TV has been pressed.

3)These buttons are used to select a preset station.

*Functions only when the component selector button AMP <TUNER> has been pressed.

^Operation buttons1)/ Setup buttons2)

1)These buttons function as play, stop, skip, etc. for operating the component.

*Function only when the component selector button TAPE/ MD, CD, DVD/LD, VCR or TV has been pressed.

2)These buttons are for adjusting various settings.

*Function only when the component selector button DVD MENU or CBL/DBS has been pressed.

English

17