TUNING OPERATIONS

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

L R

1

3

2 4

AUTOMATIC TUNING

1 Select “TUNER” as the input source.

TAPE/MD

TUNER PHONO CD MONITOR

2 Select the reception band (FM or AM) confirming it in the display.

FM/AM

or

3 TUNING MODE

AUTO/

AUTO

4 To tune to a higher frequency, press the right side once. To tune to a lower frequency, press the left side once.

DOWN TUNING UP

*If the station where tuning search stops is not the desired one, press again.

*If the tuning search does not stop at the desired station (because the signals of the station are weak), change to the MANUAL TUNING method.

MANUAL TUNING

1 Select “TUNER” as the input source.

TAPE/MD

TUNER PHONO CD MONITOR

2 Select the reception band (FM or AM) confirming it in the display.

FM/AM

or

3 TUNING MODE

AUTO/

Turn the “AUTO”

 

 

indicator off.

4 Tune to a desired station manually.

DOWN TUNING UP

*For a continuous tuning search, press and hold the button.

Note

If you tune to an FM station manually, it is received in monaural mode automatically to increase the signal quality.

26