Yamaha RX-V450 Connections, Cable indications, Video jacks, Analog jacks, Digital jacks

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between components are complete.

■Cable indications

For analog signals
left analog cables	L
right analog cables	R

Dust protection cap

Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust.

■Video jacks

This unit has two types of video jacks. Connection depends on the availability of input jacks on your monitor.

COMPONENT VIDEO

For digital signals
optical cables	O
coaxial cables	C

VIDEO

VIDEO jack

PR PB Y

For video signals
video cables	V

■Analog jacks

You can input analog signals from audio components by connecting audio pin cable to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks.

■Digital jacks

This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack. All digital input jacks are compatible with 96-kHz sampling digital signals.

Note

This unit handles digital and analog signals independently. Thus audio signals input to the analog jacks are only output to the analog OUT (REC) jacks.

For conventional composite video signals.

COMPONENT VIDEO jacks

For component signals, separated into luminance (Y) and color difference (PB, PR) to provide the best quality in picture reproduction.

Signal flow inside this unit
Input	Output
	(MONITOR OUT)

COMPONENT

VIDEO

VIDEO

14