Yamaha RX-V450 Resetting parameters to the factory presets, To reset a certain parameter

EDITING SOUND FIELD PARAMETERS

5Repeat steps 2 through 4 as necessary to change other program parameters.

Note

You cannot change parameter values when “MEMORY GUARD” is set to ON. If you want to change the parameter values, set “MEMORY GUARD” to OFF (see page 53).

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again.

■Resetting parameters to the factory presets

To reset a certain parameter

Select the parameter you want to reset, then press j/ i repeatedly to select the factory preset (the display pauses momentarily at the factory preset before proceeding to the next value).

To reset all parameters

Use PARAM. INI (see page 53).

58