Yamaha RX-V450 Displaying information about the input, source, information about the input signal

PLAYBACK

Notes

3 Press u / d to display the following

• When you play DTS-encoded CD/LDs with the input mode set				information about the input signal.
to AUTO:
– This unit automatically switches to the DTS decoding mode.
The unit remains in DTS mode (and the tindicator may
flash) for up to 30 seconds after playback of the DTS source is					SELECT
complete. To manually release the DTS mode, press INPUT
MODE to reselect AUTO.
– The DTS decoding mode may be released if search or skip					PRESET/CH
operations are performed for more than 30 seconds. To				(Format)	Signal format display. When the unit
prevent this, press INPUT MODE to select DTS.
• If the digital output data of the player has been processed in any					cannot detect a digital signal it
way, you may not be able to perform DTS decoding even if you					automatically switches to analog input.
make a digital connection between this unit and the player.				in	Number of source channels in the input
Displaying information about the input					signal. For example, a multi-channel
					soundtrack with 3 front channels, 2
source
					surround channels and LFE, is
You can display the type, format and sampling frequency
					displayed as “3/2/LFE”.
of the current input signal.
				fs	Sampling frequency. When the unit is
1 Select the input source.					unable to detect the sampling
					frequency “Unknown” appears.
				rate	Bit rate. When the unit is unable to
CD	MD/CD-R	TUNER	SLEEP		detect the bit rate “Unknown” appears.
DVD	DTV/CBL	VCR	V-AUX	flg	Flag data encoded with DTS or Dolby
					Digital signals that cue this unit to
REC			MULTI CH IN		automatically switch decoders.
		AUDIO

DISC SKIP CODE SET

2Press AMP to select the AMP mode, then press STRAIGHT so that “STRAIGHT” appears in the display.

AMP STRAIGHT

then ENTER

OPERATION BASIC

STRAIGHT

English

33