Yamaha RX-V459 owner manual Press Enter to confirm your selection, 6spk

	BASIC SETUP
5 Press d to select “SUBWOOFER” and then	7 Press d to select “SET” and then j / i to
j / i to select the desired setting.	select the desired setting.

				ENTER		ENTER
	ENTER	ENTER	A/B/C/D/E	A/B/C/D/E	A/B/C/D/E	A/B/C/D/E
A/B/C/D/E	A/B/C/D/E	A/B/C/D/E	A/B/C/D/E
				PRESET/CH		PRESET/CH
	PRESET/CH	PRESET/CH

SUBWOOFER..YES

Choices: YES, NONE

•Select “YES” if you have a subwoofer in your system.

•Select “NONE” if you do not have a subwoofer in your system.

6Press dto select “SPEAKERS” and then j/ i to select the number of speakers connected to this unit.

>SET CANCEL

Choices: SET, CANCEL

•Select “SET” to apply the settings you made.

•Select “CANCEL” to cancel the setup procedure without making any changes.

y

You can also press SET MENU to cancel the setup procedure.

8Press ENTER to confirm your selection.

PREPARATION

	ENTER		ENTER
A/B/C/D/E	A/B/C/D/E	A/B/C/D/E	A/B/C/D/E
	PRESET/CH		PRESET/CH

SPEAKERS..6spk

Choice Display			Speakers
2spk	L C R		Front L/R
	SL	SB SR
3spk	L C R		Front L/R, Center
	SL	SB SR
4spk	L C R		Front L/R, Surround L/R
	SL	SB SR
5spk	L C R		Front L/R, Center, Surround L/R
	SL	SB SR
6spk	L C R		Front L/R, Center, Surround L/R,
	SL	SB SR	Surround back

ENTER

A/B/C/D/EA/B/C/D/E

PRESET/CH

If you selected “SET” in step 7, each speaker outputs a test tone twice in turn. “CHECK:TestTone” appears in the front panel display for a few seconds and then “CHECK OK?” appears in the front panel display.

CHECK:TestTone

y

Check the speaker connections (see page 12) and adjust the “SPEAKERS” settings back in step 6, if necessary.

English

27