Yamaha RX-V459 owner manual Check Ok? ..Yes, Fr, 9Press j / i to select the desired setting

BASIC SETUP

9Press j / i to select the desired setting.

ENTER

A/B/C/D/EA/B/C/D/E

PRESET/CH

CHECK OK? ..YES

Choices: YES, NO

•Select “YES” to complete the setup procedure if the test tone levels from each speaker were satisfactory.

•Select “NO” to proceed to the speaker level adjustment menu to balance the output level of each speaker.

10Press ENTER to confirm your selection.

ENTER

A/B/C/D/EA/B/C/D/E

PRESET/CH

•If you selected “YES” in step 9, the setup procedure is completed and the display returns to the top “SET MENU” display.

•If you selected “NO” in step 9, the front speaker level adjustment display appears in the front panel display.

11Press d / uto select a speaker and then j / i to adjust the balance.

The selected speaker and the front left speaker (or the surround left speaker) output a test tone in turn.

•Press ito increase the value.

•Press jto decrease the value.

	ENTER		ENTER
A/B/C/D/E	A/B/C/D/E	A/B/C/D/E	A/B/C/D/E
	PRESET/CH		PRESET/CH

FR --------

•Select “FR” to adjust the balance between the front left and right speakers.

•Select “C” to adjust the balance between the front left and center speakers.

•Select “SL” to adjust the balance between the front left and surround left speakers.

•Select “SB” to adjust the balance between the surround left and surround back speakers.

•Select “SR” to adjust the balance between the surround left and surround right speakers.

•Select “SWFR” to adjust the balance between the front left speaker and the subwoofer.

12Press SET MENU to exit from “BASIC SETUP”.

SET MENU

MENU

SRCH MODE

28