Yamaha RX-V459 Displaying the input source information, Enjoying pure hi-fistereo sound, Straight

Enjoying pure hi-fi stereo sound

The “DIRECT STEREO” mode allows sources to bypass the decoders and DSP processors of this unit so that you can enjoy pure hi-fi sound from 2-channel PCM and analog sources.

Press AMP on the remote control and then press DIRECT ST. on the remote control to select “DIRECT STEREO”.

AMP DIRECT ST.

8

DIRECT STEREO

USING OTHER FEATURES

Displaying the input source information

You can display the format, sampling frequency, channel, bit rate, and flag data of the current input signal.

1Press one of the input selector buttons to select the desired input source.

CD MD/CD-R TUNER

DVD DTV/CBL DVR V-AUX

2Press AMP on the remote control and then press STRAIGHT on the remote control to select “STRAIGHT”.

Notes

AMP

STRAIGHT

ENT.

•To avoid unexpected noise, do not play CDs encoded in DTS when the “DIRECT STEREO” mode is selected.

•When multi-channel signals (Dolby Digital and DTS) are input, this unit automatically switches to the corresponding analog input. When “DTS” is selected as the input mode (see page 32), no sound will be output.

•No sound will be output from the subwoofer.

•“TONE CONTROL” (see page 30) and “SOUND MENU” (see page 70) settings (except for speaker level settings) are not effective.

•The front panel display automatically dims.

y

You can also select the “DIRECT STEREO” mode by pressing the PROGRAM l / h buttons on the front panel repeatedly.

STRAIGHT

3Press u / d to display the information about the input signal.

ENTER

A/B/C/D/EA/B/C/D/E

PRESET/CH

English

37