Yamaha RX-V459 owner manual DVD My DVD, Notes

SET MENU

■Input mode B)INPUT MODE

Use this feature to set this unit to reset “INPUT MODE” back to “AUTO” (see page 32) regardless of the previous setting or to recall the last input mode (“AUTO”, “DTS”, or “ANALOG”) used for that source whenever you turn on this unit.

Choices: AUTO, LAST

•Select “AUTO” to reset “INPUT MODE” back to “AUTO” (see page 32) regardless of the previous setting whenever you turn on this unit. This unit automatically selects input signals in the following order:

(1)Digital signals

(2)Analog signals

•Select “LAST” to set this unit to automatically recall the last input mode (“AUTO”, “DTS”, or “ANALOG”) used for that source whenever you turn on this unit.

■Input rename C)INPUT RENAME

Use this feature to change the name of the input source that appears in the front panel display.

The following is an example where “DVD” is renamed “My DVD”.

DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD

VOLUME

SP

A		dB
DVD My DVD	SL	SR
	L	C R

1Press one of the input selector buttons on the remote control to select the input source you want to change the name of.

CD MD/CD-R TUNER

DVD DTV/CBL DVR V-AUX

2Press AMP and then press j/ ion the remote control to place the “_” (underscore) under the space or the character you want to edit.

AMP

ENTER

A/B/C/D/EA/B/C/D/E

PRESET/CH

3Press u / d to select the character you want to use and then press j / i to move to the next space.

ENTER			ENTER
ENTER
A/B/C/D/E	A/B/C/D/E	A/B/C/D/E	A/B/C/D/E
A/B/C/D/E	A/B/C/D/E
PRESET/CH			PRESET/CH
PRESET/CH

Notes

•You can use up to 8 characters for each input.

•Press d to change the character in the following order, or press u to go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +, etc.)

4Repeat steps 1 through 3 to rename each input source.

5Press SET MENU on the remote control to exit from “INPUT RENAME”.

SET MENU

MENU

SRCH MODE

■Volume Trim D)VOLUME TRIM

Use this feature to adjust the level of the signal input at each jack. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.

Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR

Control range: –6.0 to 6.0 dB

Control step: 1.0 dB

Initial setting: 0.0 dB

74