Yamaha RX-V459 Selecting the MULTI CH INPUT component, Enjoying unprocessed input sources

USING OTHER FEATURES

Selecting the MULTI CH INPUT component

Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 21) as the input source.

Press MULTI CH INPUT on the front panel (or MULTI CH IN on the remote control) so that “MULTI CH INPUT” appears in the front panel display.

MULTI CH	MULTI CH IN
INPUT	or
Front panel	Remote control

Enjoying unprocessed input sources

When this unit is in the “STRAIGHT” mode, 2-channel stereo sources are output from only the front left and right speakers. Multi-channel sources are decoded straight into the appropriate channels without any additional effect processing.

1Press AMP and then press STRAIGHT on the remote control to select “STRAIGHT”.

AMP STRAIGHT

ENT.

	MULTI CH INPUT	STRAIGHT
Note
When “MULTI CH INPUT” is shown in the front panel display,		2 To deactivate the “STRAIGHT” mode, press
no other source can be played. To select another input source with		STRAIGHT on the remote control again so
the INPUT selector on the front panel (or one of the input selector		that “STRAIGHT” disappears from the front
buttons), press MULTI CH INPUT (or MULTI CH IN on the
		panel display.
remote control) so that “MULTI CH INPUT” disappears from the
		The sound effect is turned back on.
front panel display.
		y
Enjoying multi-channel sources in
		You can also select “STRAIGHT” by pressing STRAIGHT
2-channel stereo		(EFFECT) on the front panel.
You can mix down multi-channel sources to 2 channels
and enjoy playback in 2-channel stereo.
Press AMP and then press STEREO on the
remote control repeatedly to select “2ch Stereo”.

AMP STEREO

1

2ch Stereo

y

•You can use a subwoofer with this program when “BASS OUT” is set to “SWFR” or “BOTH” (see page 71).

•You can also select “2ch Stereo” by pressing the

PROGRAM l / h buttons on the front panel.

36