BASIC SETUP
7Press d to display the SPEAKERS parameter.
PRESET/CH
SELECT
8Press j / i to select the number of speakers you connected.
SPEAKERS 6spk
Choices Display | Speakers | |
| L C R | Front L/R |
2spk |
| |
SL SB SR |
| |
|
| |
| L C R | Front L/R, Center | |
3spk |
| ||
SL SB SR |
| ||
|
| ||
| L C R | Front L/R, Surround L/R | |
4spk |
| ||
SL SB SR |
| ||
|
| ||
| L C R | Front L/R, Center, Surround L/R | |
5spk |
| ||
SL SB SR |
| ||
|
| ||
| L C R | Front L/R, Center, Surround L/R, | |
6spk | Surround back | ||
SL SB SR | |||
|
|
9Press d to display SET/CANCEL.
PRESET/CH
SELECT
10Press j / i to select the desired setting.
>SET CANCEL
SET | To apply the settings you chose in steps |
| 4 through 8. |
CANCEL | To cancel the setup without making |
| any changes. |
11Press SELECT to confirm your selection.
PRESET/CH
SELECT
If you selected SET, you hear a test tone from each speaker in turn. “CHECK:TestTone” appears in the front panel display for a few seconds, then “CHECK: OK?”.
CHECK:TestTone
CHECK OK? YES
12Press j / i to select the desired setting.
CHECK OK? YES
YES To complete the setup process if the test tone levels from each speaker were satisfactory.
NO To proceed to the SP LEVEL speaker level adjustment menu to balance the level of each speaker.
13Press SELECT to confirm your selection.
PRESET/CH
SELECT
If you selected NO in step 12, the front speaker level adjustment display appears in the front panel display.
24
