SET MENU
■Audio set G)AUDIO SET
Use to customize this units overall audio settings.
Audio mute A.MUTE
Use to adjust how much the mute function reduces the output volume.
Choices: MUTE,
•Select MUTE to completely halt all output of sound.
•Select
Audio delay A.DELAY
Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.
Choices: 0 to 160 ms
2 INPUT MENU
Use to reassign digital input/outputs and select the input mode.
■Input/output assignment A)I/O ASSIGN
You can assign jacks according to the component to be used if this unit’s initial settings do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.
Once the inputs have been reassigned, you can select the corresponding component by using INPUT on the front panel or the input selector buttons on the remote control.
For COMPONENT VIDEO jacks A (C.V[A]) and B
(C.V[B])
Choices: DVD,
For OPTICAL OUTPUT jack 1 (OUT(1))
Choices:
DVD
For OPTICAL INPUT jacks 2 (IN(2)), 3 (IN(3)) and 4 (IN(4))
Choices: CD,
R
For COAXIAL INPUT jack 5 (IN(5))
Choices: CD,
R
Notes
•You cannot select a specific item more than once for the same type of jack.
•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.
■Input mode B)INPUT MODE
Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 32 for details about the input mode). Choices: AUTO, LAST
•Select AUTO to allow this unit to automatically detect the type of input signal and select the appropriate input mode.
•Select LAST to set this unit to automatically select the last input mode used for that source.
Note
Even if LAST is selected, the last setting for the EX/ES button will not be recalled.
52
