3 OPTION MENU
Use to adjust the optional system parameters.
■Display set A)DISPLAY SET
Dimmer DIMMER
Use to adjust the brightness of the front panel display. Choices:
Video conversion V CONV.
Use this feature to turn on/off conversion of composite (VIDEO) signals to
Choices: ON, OFF
•Select OFF not to convert any signals.
•Select ON to convert composite signals to
Note
Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video connections (i.e.,
■Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: ON, OFF
Select ON to protect:
•DSP program parameters
•All SET MENU items
•All speaker levels
When “MEMORY GUARD” is set to ON, you cannot use the test tone or select any other SET MENU items.
SET MENU
■Parameter initialization C)PARAM. INI
Use this feature to initialize the parameters for each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial settings.
Press the corresponding numeric button for the sound field program that you want to initialize.
An asterisk (*) next to a program number means that the parameter values have been changed from their initial settings.
Notes
•You cannot automatically revert to the previous parameter settings once you initialize a sound field program group.
•You cannot separately initialize individual sound field programs.
•You cannot initialize any program groups when “MEMORY GUARD” is set to ON.
■Zone set D)ZONE SET
Use to specify the location of speakers connected to the SPEAKERS B terminals.
Speaker B set SP B
Use this feature to select the location of the front speakers connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
•Select FRONT to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.
•Select ZONE B if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned OFF and SPEAKERS B is turned ON, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only.
Notes
•If you connect headphones to the PHONES jack on the unit when “SP B” is set to ZONE B, the sound is output from both headphones and SPEAKERS B.
•If a DSP program is selected when “SP B” is set to ZONE B, the unit automatically enters the Virtual CINEMA DSP mode.
OPERATION | ADVANCED |
|
|
English
53
