Yamaha RX-V550 7Select a sound field program if desired, To listen with headphones SILENT CINEMA

TONE CONTROL

PROGRAM

7Select a sound field program if desired.

Rotate PROGRAM (or press AMP on the remote control to select the AMP mode, then press one of the sound field program buttons repeatedly) to select a sound field program. (See page 43 for details about sound field programs.)

PROGRAM

AMP

or

Front panel

STEREO	HALL	JAZZ	ROCK
1	2	3	4
MUSIC	ENTERTAIN	TV THTR	MOVIE
5	6	7	8
q/DTS	NIGHT	EX/ES	STRAIGHT
9	0	10	ENTER
			EFFECT

Remote control

To listen with headphones (SILENT CINEMA)

“SILENT CINEMA” allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS surround, through ordinary headphones. “SILENT CINEMA” activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs. When activated, the “SILENT CINEMA” indicator lights up in the front panel display.

Notes

•This unit will not be set to “SILENT CINEMA” when MULTI CH INPUT is selected as the input source.

•“SILENT CINEMA” is not effective when the Direct Stereo or 2ch Stereo program is selected, or in STRAIGHT mode.

PLAYBACK

To adjust the tone

You can adjust the tonal quality of your front left and right speakers or headphones (when connected).

Press TONE CONTROL on the front panel repeatedly to select TREBLE or BASS, then rotate PROGRAM to the right or left to increase or decrease.

• Select TREBLE to adjust the high frequency response.

•Select BASS to adjust the low frequency response.

To cancel the tone control, press TONE CONTROL repeatedly to select BYPASS.

y

Speaker and headphone adjustments are stored independently.

Notes

•If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers.

•TONE CONTROL is not effective with the Direct Stereo program (page 31) or MULTI CH INPUT.

To mute the sound

Press MUTE on the remote control.

The MUTE indicator blinks in the MUTE front panel display. To resume the audio output, press

MUTE again (or press VOLUME –/+). The MUTE indicator disappears from the display.

y

You can adjust the muting level (see page 52).

OPERATION BASIC

English

27