4 For a DVD/LD or TV/DBS source, the current input mode is also shown.
*To change the input mode for the DVD/LD or TV/DBS source, press INPUT MODE (or the button that you have pressed to select the input source in step 3 on the remote control) once or more until the desired input mode is shown on the display. (See page 26 for details on switching the input mode.)
Front panel | Remote control |
or
Input mode
5 Select the main speakers to be used.
Front panel
* If you use two main speaker systems, press both A and B.
6 Play the source. (See page 28 for detailed information on tuning.)
|
|
|
| English | |
7 | Adjust the volume to the desired output level. | ||||
| |||||
| Front panel | Remote control |
| ||
or
8 If desired, adjust BASS, TREBLE, BALANCE, etc. and use the digital sound field processor (see pages 37 to 38).
BASS: Turn this control clockwise to increase (or counterclockwise to decrease) the low- frequency response.
TREBLE: Turn this control clockwise to increase (or counterclockwise to decrease) the high- frequency response.
BALANCE: Adjust the balance of the output volume from the left and right speakers to compensate for any sound imbalance caused by the speaker location or listening room conditions.
Front panel
*These controls are only effective for the sound from the main speakers.
Front panel | Remote control |
or
When you have finished using this unit
Press STANDBY/ON on the front panel again or STANDBY on the remote control to set this unit in the standby mode.
25