English

 

SYMPTOM

CAUSE

REMEDY

 

 

 

 

 

 

 

 

The remote control does not work.

Direct sunlight or lighting (from an

Change the position of this unit.

 

 

 

inverter type of fluorescent lamp, etc.) is

 

 

control

 

striking the remote control sensor of this

 

 

 

unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

The manufacturer’s code has not been

Set the code again.

 

Remote

 

set properly.

 

 

 

 

 

 

 

The proper manufacturer’s code for the

Try entering another code for the same

 

 

 

 

 

 

component to be controlled has not

manufacturer.

 

 

 

been set.

 

 

 

 

 

 

 

 

 

The component to be controlled has not

Set the SELECTOR DIAL to the proper

 

 

 

been selected.

position.

 

 

 

 

 

 

 

The sound is degraded when

This unit is in the standby mode.

Turn on the power of the unit.

 

 

listening with the headphones to a

 

 

 

Others

CD player or tape deck that is

 

 

 

connected to this unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

There is noise interference from

The unit is too close to the digital or

Move the unit further away from such

 

 

digital or high-frequency equipment

high-frequency equipment.

equipment.

 

 

or the unit.

 

 

 

 

 

 

 

 

When playing back a source encoded with DTS

 

 

 

 

 

 

 

 

SYMPTOM

CAUSE

REMEDY

 

 

 

 

 

A loud hissing noise is heard when you

The player which plays back the source

The player must be connected to a

 

play back a source encoded with DTS.

is not connected to a digital audio signal

digital audio signal input terminal of this

 

 

 

input terminal of this unit.

unit besides the analog audio signal

 

 

 

 

terminal connections.

 

 

 

 

 

 

 

 

The ANALOG input mode is selected on

Select a proper input mode on this unit

 

 

 

this unit.

to turn on the DTS decoder built into

 

 

 

 

the unit.

 

 

 

 

 

A percussive noise is heard when you

If the AUTO input mode is selected,

Set the input mode of the currently

 

begin playing back a source encoded

depending on some sources, there may

selected input source to DTS.

 

with DTS.

be a case that a noise is heard while

 

 

 

 

this unit is identifying the format of the

 

 

 

 

input signal.

 

 

 

 

 

 

No sound is heard when you play back

The DTS decoder built into this unit

Set the player’s digital volume control

 

a source encoded with DTS, even

does not function because the player

at the maximum, neutral or ineffective

 

though the AUTO input mode is

has a digital volume control and it is set

position.

 

selected on this unit.

at a position other than “maximum,”

 

 

 

 

“neutral” or “ineffective.”

 

 

 

 

 

 

No sound is heard when you play back

A source encoded with DTS cannot be

 

 

an MD or DAT on to which you have

recorded on to an MD or DAT.

 

 

recorded a source encoded with DTS.

 

 

 

 

 

 

 

No sound is heard when you play back

In the AUTO mode, the DTS-decoding

Press INPUT MODE on the front panel

 

a source (CD, etc.) even though the

mode cannot be automatically changed

or INPUT (for the currently selected

 

currently selected input mode is AUTO.

to the normal (PCM) digital signal input

source) on the remote control so that

 

 

 

mode.

AUTO appears on the display.

 

 

 

 

 

 

Notes

•It is necessary to use a DTS decoder to play back a source encoded with DTS, so the player which plays back the source must be connected to a digital audio input terminal of this unit in the way described in this manual. If this connection is not made or only a D-to-A converter is being used without using a DTS decoder, when you play back the source, only a loud hissing noise will be heard.

•If you make a search (or skip, etc.) operation while playing back a source encoded with DTS, the “dts” indicator goes out from the display. This is because this unit automatically changes the DTS-decoding mode to the standard (PCM) digital signal input mode to prevent a noise from being output.

53