Yamaha RX-V595aRDS SETTING THE SLEEP TIMER

SETTING THE SLEEP TIMER

The SLEEP timer can be used to make this unit automatically switch to the standby mode. When you are going to sleep while enjoying a broadcast or other desired input source, this timer function is useful. The SLEEP timer can only be controlled with the remote control.

Notes

•To set the SLEEP timer for this unit, set the SELECTOR DIAL to a position other than the TV position. To set the SLEEP timer for your TV, set the SELECTOR DIAL to the TV position.

•The components for which the SLEEP timer is effective are the sources connected to the AC OUTLET(S) on the rear panel of this unit.

1

To set the SLEEP time

1 Play the source which you want to enjoy when you are going to sleep and press SLEEP once or more to select the desired SLEEP time.

Remote control

The SLEEP time is displayed.

Flashes

Each time you press SLEEP, the SLEEP time will change as follows:

(Minutes)

120 90 60 30

The SLEEP timer is off (SLEEP OFF). (This is the state before SLEEP is pressed.)

The “SLEEP” indicator soon lights up and the display returns to the indication before the SLEEP timer was set.

2 The unit will be switched to the standby mode automatically at the selected SLEEP time.

To cancel the selected SLEEP time

Remote control

Press SLEEP once or more so that “SLEEP OFF” appears on the display. (It will soon disappear and the “SLEEP” indicator will go off from the display.)

Note

The SLEEP timer setting can also be canceled by setting the unit in the standby mode with STANDBY/ON on the front panel (or STANDBY on the remote control) or by disconnecting the power plug of the unit from the AC outlet.

36