qINPUT MODE
This button switches between the DVD/LD and TV/DBS input signal modes.
wVOLUME
This control is used to raise or lower the volume level.
ePHONES jack
When you use headphones, connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through the headphones.
When using headphones only, set both SPEAKERS A and B to the OFF position and switch off the digital sound field processor (so that no DSP program name appears on the display) by pressing EFFECT.
rSPEAKERS
Set A or B (or both A and B) to the ON position for the main speaker system (connected to this unit) that you want to use. Set the button(s) for the main speaker system you don’t want to use to the OFF position.
tA/B/C/D/E
Press this button to select one of a group (A to E) of preset stations.
yPreset station number selector
Each of these buttons selects a preset station number (1 to 8).
uTone controls
These controls are only effective for the sound from the main speakers.
BASS
Use this control to increase or decrease the
TREBLE
Use this control to increase or decrease the
iBALANCE
This control is only effective for the sound from the main speakers.
Turn the control to adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions.
oRDS MODE
When an RDS station is received, pressing this button changes the display mode into the PS mode, PTY mode, RT mode and/ or CT mode (if the station employs those RDS data services) in turn.
pPTY SEEK MODE
When this button is pressed, the unit is set in the PTY SEEK mode.
aPTY SEEK START
Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.
sEON
Press this button to select the desired program type (NEWS, INFO, AFFAIRS, SPORT) when you want to call a radio program of that type automatically.
dTIME/LEVEL
Press this button to select the item in the TIME/LEVEL mode.
f+/–
These buttons are used to adjust the settings of the SET MENU mode and the TIME/LEVEL mode. In the TIME/LEVEL mode, press + to increase the delay time or speaker output level. Press
gSET MENU
Press this button to select functions in the SET MENU mode.
hPROGRAM selector
Press 
or 
to select a DSP program.
The name of the selected program appears on the display.
jEFFECT
Press this button once to switch the effect speakers (center and rear) on or off. If you turn off the effect by using EFFECT, all Dolby Digital and DTS audio signals are directed to the main left and right channels. In that case, the left and right channel signal levels may not match.
kVIDEO AUX terminals
Connect an auxiliary video or audio input source such as a camcorder to these terminals. If the connected video unit has an S video output terminal, connect it to the S VIDEO terminal to obtain a
English
9