4 | 1 | 2 | 1,4 |
|
|
|
2
1 Select the source to be recorded.
Front panel | Remote control |
or
2 Play the source and then turn VOLUME up to confirm the input source. (For detailed information on tuning, see page 29.)
Front panel | Remote control |
or
3 Begin recording on the tape deck, MD recorder or VCR connected to this unit.
4 When the tape deck or MD recorder is used for recording, you can monitor the sounds being recorded by pressing TAPE/MD MON / EXT. DECODER so that the “TAPE/MD MON” indicator lights up on the display.
Front panel | Remote control |
or
Notes
•The settings of DSP and VOLUME, BASS, TREBLE and BALANCE have no effect on the material being recorded.
•Composite video and S video signals pass independently through this unit’s video circuits. Therefore, when recording or dubbing video signals, if your video source unit is con- nected to provide only an S video (or only a composite video) signal, you can record only an S video (or only a composite video) signal on your VCR.
•A source that is connected to this unit through digital termi- nals only cannot be recorded by a tape deck or VCR con- nected to this unit.
•Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws.
If you watch a video software that uses scrambled or encoded signals to prevent it from being dubbed, there may be a case that the picture itself will be affected by those signals.
28