Adjusting delay time

 

 

Notes

 

 

You can adjust the time difference between the beginning of the

•

Adding too much delay will cause an unnatural effect with

sound from the main speakers and the beginning of the effect

 

some sources.

 

 

sound from the rear speakers.

•

When + or –is pressed, the sound is momentarily inter-

The larger the value, the later the effect sound is generated.

 

rupted.

 

 

This adjustment can be made to all programs individually.

 

 

 

 

 

 

 

 

 

 

 

Program

 

Control range (ms)

Preset value

 

 

 

 

 

 

 

 

 

1.

DOLBY PRO LOGIC

 

15 to 30

20

 

 

 

DOLBY DIGITAL

 

0 to 15

5

 

 

2.

DOLBY PRO LOGIC ENHANCED

 

15 to 30

20

 

 

 

DOLBY DIGITAL ENHANCED

 

0 to 15

5

 

 

3.

70 mm MOVIE THEATER

 

15 to 30

20

 

 

 

DIGITAL MOVIE THEATER

 

1 to 99

16

 

 

4.

MONO MOVIE

 

1 to 99

49

 

 

5.

TV SPORTS

 

1 to 99

9

 

 

6.

DISCO

 

1 to 99

40

 

 

7.

ROCK CONCERT

 

1 to 99

16

 

 

8.

CONCERT HALL

 

1 to 99

44

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjusting output level of the center, right rear and left rear speakers, and subwoofer

English

If desired, you can adjust the sound output level of each speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on pages 22 to 24.

Notes

•Output level of the center speaker cannot be adjusted when the program DISCO, ROCK CONCERT or CONCERT HALL is selected, and the input signal is analog, PCM audio, or encoded with Dolby Digital in 2-channel.

•If the function “1. CNTR” in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted. This is because, in this mode, the center sound is automatically output from the left and right main speakers.

•Once the output level is adjusted, the level will be the same for all digital sound field programs.

 

Speakers

Control range (dB)

Preset value

 

 

 

 

 

 

 

CENTER

MIN, –20 to +10

0

 

 

RIGHT SURROUND (Rear)

MIN, –20 to +10

0

 

 

LEFT SURROUND (Rear)

MIN, –20 to +10

0

 

 

SUBWOOFER

MIN, –20 to 0

0

 

 

 

 

 

 

 

 

 

 

 

Note

The values of the delay time, center/rear/subwoofer output level you set the last time will remain memorized even when this unit is in the standby mode. However, if the power cord is kept disconnected for more than one week, these values will automatically change back to the original factory settings.

45