DISPLAY PANEL

English

1Multi-information display

Displays various information, for example station frequency, preset station number and name of selected input source.

2MEMORY indicator

When MEMORY is pressed, this indicator flashes for about five seconds. During this period, the displayed station can be stored to the memory.

3AUTO TUNING indicator

Lights up when this unit is in the automatic tuning mode.

4TAPE/MD MON indicator

Lights up when the tape deck (or MD recorder etc.) is selected as the input source by pressing TAPE/MD MON / EXT. DECODER on the front panel or TAPE/MD on the remote control transmitter.

5STEREO indicator

Lights up when an FM stereo broadcast with sufficient signal strength is received.

6Signal-level meter

Indicates the signal level of the received station.

If multipath interference is detected, the indication decreases.

7RDS mode indicators

The name(s) of RDS mode(s) employed by the currently received RDS station light(s) up. Illumination of the indicator on the head of a name shows that the corresponding RDS mode is now selected.

8, and indicators

“” lights up when the built-in Dolby Digital decoder is on and the signals of selected source encoded with the Dolby

Digital is not in 2-channel. “” lights up when the built-in

digital sound field processor is on, and “” lights up when the built-in Dolby Pro Logic Surround decoder is on.

Depending on the selected DSP program, both “” and

“”, or both “” and “” will light up.

9PTY HOLD indicator

Lights up while the search is performed in the PTY SEEK mode.

0EON indicator

Lights up when an RDS station that employs the EON data service is received.

qProgram type name indicators

The name selected in the EON mode lights up.

wSLEEP indicator

Lights up while the built-in SLEEP timer is functioning.

9