Notes
•You can replace a preset station with another FM or AM station manually by simply following the procedures in the section “To store stations” on page 30.
•The automatic preset tuning search will be performed through all RDS network frequencies until stations are stored up to E8. Even if the number of received stations is not enough to be stored up to E8, the search is finished automatically after searching all frequencies.
•With this function, only RDS stations with sufficient signal strength are stored automatically. If the station you want to store is weak in signal strength, tune in to it in monaural manually and store it by following the procedures in the section “To store stations” on page 30.
*There may be a case that this function cannot receive a station which could be received by the automatic tuning method. This is because this function receives a large volume of PI (Program Identification) data along with the station.
EXCHANGING PRESET STATIONSYou can exchange the places of two preset stations with each other as shown below.
2,4
Example
If you want to shift the preset station on E1 to A5, and vice versa.
1 | Recall the preset station on E1 (by following the | 3 Next, recall the preset station on A5 by following the | |||||
| procedures in the section “To recall a preset station” on | same procedures as in step 1. | |||||
| page 31). |
|
| ||||
|
|
|
|
|
|
|
|
2 | Press EDIT. |
|
| ||||
|
| ||||||
|
| ||||||
| Front Panel | Flashes. | |||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 Press EDIT once more.
Flashes. | Front Panel | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shows the exchange of stations is completed.
English
33