PREPARATION
SpeakersUse speakers with the specified impedance shown on the rear of this unit.
Rear speakers
RightLeft
Center speaker
Subwoofer system
CENTER REAR (SURROUND)
| OUTPUT |
|
| MAIN CENTER REAR |
|
| (SURROUND) |
|
| SUB |
|
| WOOFER |
|
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. |
|
|
MAIN |
|
|
A | A |
|
B | B |
|
SPEAKERS | Left | Right |
|
|
RightLeft
Main speakers A | Main speakers B |
|
How to Connect:
Connect the SPEAKERS terminals to your speakers with the wire of the proper gauge (keep as short as possible). If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct. That is the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit or the speakers, or both.
For connecting to the MAIN SPEAKERS terminals
Red: positive (+) | <U.S.A., Canada, China, Australia and General models | |
Black: negative | only> | |
| Banana Plug connections are also possible. Simply insert the | |
| Banana Plug connector into the corresponding terminal. | |
| ➀Loosen the knob. | |
2 | ➁Insert the bare wire. | |
[Remove approx. 5mm | ||
1 | (1/4”) insulation from | |
the speaker wires.] | ||
| ||
| ➂Tighten the knob and | |
3 | secure the wire. | |
|
20