REMOTE CONTROLLER

Entering manufacturer codes

If you have a component which is not a Yamaha model, you can enter the code for the manufacturer of the component in the corresponding position of the selector dial. By doing so, you can control the component with the remote controller.

Refer to the code list at the end of this manual for the code numbers you need.

Notes

cSome Yamaha CD players and tape decks cannot be controlled with the default codes. To control such a model, enter the code for the model in the corresponding position.

cIf there is no code applicable for your component in the code list, you must use the remote controller provided for the component.

English

Entering a code

1 Set the selector dial to the position for controlling the component. (For example, set to “VCR” for a VCR.)

POWERSTANDBY

 

VCR

 

/DTS

 

MOVIE

SURROUND

MOVIE

THEATER 2

CD

THEATER 1

TAPE/MD

2 Press both of the VOLUME and keys at the same time and hold them until the indicator flashes twice.

TV

POWER

STANDBY

CODE SET

 

MUTE

VCR

Flashes

VOLUME

 

twice.

3 Use the numeric keys to enter the four-digit manufacturer code for the component to be used. Make sure that the indicator flashes twice.

/DTS

 

MOVIE

 

 

SURROUND

MOVIE

THEATER 2

POWER

 

CD

THEATER 1

TAPE/MD

STANDBY

1

TUNER

3

 

 

2

 

 

MONO MOVIE

DISCO

 

 

 

 

 

DVD/LD

TV SPORTS

VCR

 

VCR

ROCK

5

CHURCH

 

Flashes

4

TV/DBS

6

 

 

 

 

 

PHONO

JAZZ CLUB

TEST

 

twice.

HALL

8

 

7

V-AUX

9

 

 

 

 

 

EXT. DEC.

+10

+100

 

 

0

CLEAR

 

 

ENTER

 

 

 

 

 

 

A/B/C/D/E

*If the indicator does not flash, repeat step 3 and enter the code again.

4 Try operating the component with the remote controller to check the code entering is successful.

Note

If the component cannot be controlled, enter another code for the same manufacturer.

Entering a code for a second (or third) VCR

You can use the CBL/DBS or DVD MENU position, or both of them to control a second (and/or third) VCR if you do not use a cable TV, DBS tuner, DVD player etc.

* If you will use the DVD MENU position for a second (or third) VCR, you must enter the code for an LD player in the DVD/LD position.

1 Set the selector dial to the CBL/DBS or DVD MENU position.

POWERSTANDBY

 

DVDMENU

 

/DTS

 

MOVIE

SURROUND

MOVIE

THEATER 2

CD

 

TAPE/MD

2 Press both of the VOLUME and keys at the same time and hold them until the indicator flashes twice.

TV

 

POWER

 

STANDBY

 

CODE SET

 

 

 

MUTE

DVDMENU

Flashes

 

 

 

VOLUME

 

twice.

 

 

 

3

TV

 

 

Press the MUTE key.

 

 

CODE SET

MUTE

VOLUME

4 Use the numeric keys to enter the four-digit manufacturer code for the second (or third) VCR. Make sure that the indicator flashes twice.

/DTS

 

MOVIE

 

 

 

SURROUND

MOVIE

THEATER 2

POWER

 

 

CD

THEATER 1

TAPE/MD

 

STANDBY

1

TUNER

3

 

 

 

2

 

 

 

MONO MOVIE

DISCO

 

 

 

DVD/LD

TV SPORTS

VCR

 

DVDMENU

Flashes

ROCK

5

CHURCH

 

 

4

TV/DBS

6

 

 

 

 

 

 

 

PHONO

JAZZ CLUB

TEST

 

 

twice.

HALL

8

 

 

7

V-AUX

9

 

 

 

 

 

 

 

EXT. DEC.

+10

+100

 

 

 

0

CLEAR

 

 

 

ENTER

 

 

 

 

 

 

 

 

A/B/C/D/E

*If the indicator does not flash, repeat step 4 and enter the code again.

5 Try operating the component with the remote controller to check the code entering is successful.

Note

If the component cannot be controlled, enter another code for the same manufacturer.

67