REMOTE CONTROLLER

The remote controller is designed to control the most commonly used functions. If you have other Yamaha audio and video components with remote control capability, this remote controller will also control various functions of them.

In addition, this remote controller can control other manufacturers’ audio and video components by programming the remote controller with the codes for other manufacturers.

Basic operation

1 Select the position for the component that you want to

2 Press an operation key.

control by turning the selector dial.

Note: Press a key with the remote controller aimed at the

Note: Turn the selector dial unitl it stops with a click.

front panel.

POWER

 

STANDBY

 

 

 

Selected position

 

 

AMP/TUN

is shown.

 

 

 

 

The indicator will flash

 

 

 

when a key is pressed.

English

Components which can be controlled

The selector dial can be turned to select nine positions. The components which can be controlled with the remote controller differs depending on the selected position. Refer to the diagram below to know what components can be controlled for each position.

POWERSTANDBY

 

AMP/TUN

 

/DTS

 

MOVIE

SURROUND

MOVIE

THEATER 2

CD

THEATER 1

TAPE/MD

1

TUNER

3

2

MONO MOVIE

DISCO

 

DVD/LD

TV SPORTS

VCR

4 TV/DBS 6

5

P/T

UN

AM

TAPE/MD

CD

DSP

DVD/LD

DVDMENU

VCR

CBL/DBS

TV

AMP/TUN

This unit can be controlled. Normally set to this position

TAPE/MD

Tape decks and MD recorders can be controlled.

*Keys are originally preset to control Yamaha tape decks. To control a Yamaha MD recorder, enter the code for Yamaha MD recorders.

CD

CD players can be controlled.

* Keys are originally preset to control Yamaha CD players.

DSP

This unit can be controlled and DSP programs can be selected directly.

DVD/LD

DVD players and LD players can be controlled.

* To control the Yamaha model DVD-1000 or DVD-S700, enter the code number “4490”.

DVD MENU

DVD players can be controlled.

* A code for a DVD player cannot be entered in this position.

VCR

VCRs can be controlled.

CBL/DBS

Cable TVs or DBS tuners can be controlled.

TV

TVs can be controlled.

Notes

cYou can program the remote controller with the codes for other manufactures for all positions (except AMP/TUN and DSP) respectively.

For example, if your CD player is not a Yamaha model, enter the code for the manufacture of the CD player when the CD position is selected. You can control your CD player with the remote controller when the CD position is selected.

You can enter one code for one position. Refer to page 67 for details about entering codes.

cSome Yamaha CD players and tape decks cannot be controlled with the default codes. To control such a model, enter the code for the model in the corresponding position.

cFor the DVD/LD and DVD MENU positions:

If you enter a code for a DVD player in the DVD/LD position, the keys in the DVD MENU position become also available for controlling the DVD player. You cannot enter a code for a DVD player when the DVD MENU is selected.

cYou can enter the code for your second (or third) VCR in the CBL/DBS position if you do not use a cable TV, DBS tuner, etc. You can also enter the code for your second (or third) VCR in the DVD MENU position if you do not use a DVD player. In this case, however, you must enter a code for an LD player in the DVD/LD position even if you do not use an LD player.

Refer to page 67 for details.

61