Yamaha RX V2095RDS Empty keys (1, 2), Memory back-up

REMOTE CONTROLLER

Notes

•Area A cannot learn a new function. To store a new function, store it onto area B or C.

•If a key which has a preset function learns a new function, the preset function will not work but is not deleted. When the learned function is cleared, the preset function is restored. (For information on clearing a learned function, refer to page 82.)

Empty keys (1, 2)

These are empty keys. Each key can learn a function from another remote controller.

For example, the TV key is useful for storing the function of your TV’s power switch, and the VCR key can be used for your VCR’s power switch.

About the lighting of keys

When you press an input selector key, it lights up for about 3 seconds.

When an input selector key in the group of selected memory area (A, B or C) is pressed, the mark of a key group (1–3) which is the same as the mark of the selected input selector key lights up for about 3 seconds.

Example:

Lights up.

TRANSMIT

/LEARN

CLEAR LEARN MACRO

English

About the marks on the remote controller

Mark

Meaning

Tape (Tape deck, VCR, etc.)

Disc (CD player, LD player, etc.)

Radio wave (Tuner, TV/BS tuner, etc.)

An input selector key and other control keys which have the same mark will work for the same input source.

These marks are also helpful for storing new functions.

Examples)

•Area B of keys 1 is suitable for storing functions to control your VCR.

•Area B of keys 3 is suitable for storing functions to control your TV/BS tuner.

REC/PAUSE	A/B
	TAPE/
	A

			Red (This shows that
		TUNER	memory area A is
			memory area A is
A DIR	B	VCR 1	selected.)
STOP		D SC	B

Conversely, when a key of the group 1–3is pressed, its mark and the input selector key with the same mark in the group of the selected memory area light up for about 3 seconds.

This feature may be helpful for you if you store functions for controlling an input source to a group of keys whose mark lights up when the corresponding input selector key is pressed.

To record new functions									Memory back-up
It is recommended that you write down stored key functions									Memory back-up
on the provided user function stickers and paste them on the									All of the learned functions will be retained while you
reverse side of the remote controller or the reverse side of									replace the batteries. However, if no batteries are
the remote controller’s cover.									installed for a few hours, the learned functions will be
									erased and will have to be learned again.
									erased and will have to be learned again.

REMOTE CONTROL	75
TRANSMITTER