REMOTE CONTROLLER

mClearing learned functionsTo Clear a Learned Function

1 To clear a learned key function, press the LEARN button using a ball-point pen or similar object.

To clear a macro you made, press the MACRO button.

or

TRANSMIT

/LEARN

CLEAR LEARN MACRO

Flashes slowly.

2 Press and hold the CLEAR button using a ball-point pen or similar object.

CLEAR LEARN MACRO

3 Holding the CLEAR button pressed, press and hold the key whose function you want to clear until the indicator flashes 3 times.

CD

TRANSMIT

 

/LEARN

Flashes.

To clear two or more functions sequentially, do not release the CLEAR button, and repeat this step.

Note

If you clear a learned function of a key, the key is restored by the originally preset function. (except the keys which are originally preset with no function.)

To Clear All Learned Functions

1 Select the kind of key functions all of which you want to clear by using the MACRO switch on the side panel of the remote controller.

SLOW QUICKOFF MACRO

OFF: Select this position if you want to clear all of the learned functions except macros.

QUICK: Select this position if you want to clear all of the macros you made.

SLOW: Select this position if you want to clear all of the learned functions including macros.

2 Press the CLEAR button using a ball-point pen or similar object.

TRANSMIT

/LEARN

CLEAR LEARN MACRO

Flashes slowly.

*If one of the following is made after you press the CLEAR button, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. Press the CLEAR button again.

•MACRO switch is switched to another position.

•Another key is pressed.

•There is no operation for about 30 seconds.

3 Press and hold the CLEAR button again. While holding down the CLEAR button, press and hold the MASTER

VOLUME and keys simultaneously until the indicator flashes 7 times.

TRANSMIT

/LEARN

MUTE

Flashes.

82