46
Basics
Section
Selecting Elements
In Voice Edit Mode, you can select the
Element to edit by pressing the respective
BANK key ([A] to [D]). When you select an
Element, the cursor moves to the respective
Element Number.
Example: When “Element 2” is selected
Switching Elements On/Off
In Voice Edit Mode, an Element can be
switched off when you press the respective
BANK key ([E] to [H]). This lets you
temporarily mute other Elements in the Voice
so that you can listen to the changes to the
Element that you are editing. A muted (off)
Element will be indicated as an asterisk (*) in
the display as illustrated below.
Example: When Elements 2 and 3 are
turned off
EQ Param)LoFreq LoGain HiFreq HiGain
EL1**4 274.2Hz +12 2.82kHz +22
off off
PLGEXT
DRUMDRUM QUICK
ACCESS
INTPRE2PRE1
AB
A. PIANO E. PIANO ORGAN GTR
/
BASS STRINGS BRASS SYNTH OTHER
CDEFGH
1234
ELEMENT SELECT ELEMENT ON
/
OFF
EQ Param)LoFreq LoGain HiFreq HiGain
EL12_34 274.2Hz +12 2.82kHz +22
Cursor
EXT
DRUMDRUM QUICK
ACCESS
INTPRE2PRE1
AB
A. PIANO E. PIANO ORGAN GTR
/
BASS STRINGS BRASS SYNTH OTHER
CDEFGH
1234
ELEMENT SELECT ELEMENT ON
/
OFF
PLG
COMMON
Element1
Element2
Element3
Element4
Switching Between Screens and Entering Settings
After selecting a Common Edit screen or a
edit screen for an Element (1 to 4), use the
[PAGE] knob to switch to other screens.
There are many parameters available within a
screen. To make editing easier, the knobs
below the LCD are assigned to each of the
parameters in the screen.
Menu Screen
If you use the [PAGE] knob while holding
down the [SHIFT] key, the settings menu will
be displayed. Use the [PAGE] knob to move
the cursor to an item and release the [SHIFT]
key to jump to the screen for that item.
You can also use other knobs and keys to enter
settings. The Compare featureallows you to
compare the sound being edited against the sound
prior to editing. Details are given on Pages 19, 64.
3Common Edit Screens

Each Voice consists of up to four Elements. Here,

the parameters common to all Elements are

explained.

• GEN (Common General)

Here, you can set general parameters in Common

Edit, such as the Voice Name.

GENíName) Ctgry a-Z 0-? Cursor
C 1234 [Pf:Init Voice]
SHIFT PAGE
PART
/
ELEMENT
DATAABC12
GENíOther) Com:>GEN≥QED>ARP>CTL>LFO>EFF
C 1234 Elem:>OSC>PCH>FLT>AMP>LFO>EQ
Cursor
SHIFT PAGE
PART
/
ELEMENT
DATAABC12
AMP Scale)Ofst1 Ofst2 Pfst3 Ofst4
EL12_34 + 0 + 0 - 21 - 35
SHIFT PAGE
PART
/
ELEMENT
DATAABC12
AMP Scale)Ofst1 Ofst2 Pfst3 Ofst4
EL12_34 + 0 + 0 - 21 - 35