9
Basics
Section
Before Use
This section explains how to connect to an AC power source, audio and MIDI devices, and a computer
system. Only switch the synthesizer on after you have made all the necessary connections.
It is recommended that you read this section before using the synthesizer.
Power Supply
1Make sure that the instrument’s STANDBY/ON switch is at the STANDBY(off) position.
2Connect the PA-5C’s DC plug to the S30’s DC IN terminal on the instrument’s rear panel.
3Connect the adaptor’s AC plug to the nearest electrical outlet.
Do not attempt to use an AC adaptor other than the Yamaha PA-5C or an equivalent recommended by Yamaha.
The use of an incompatible adaptor may cause irreparable damage to the S30, and may even pose a serious shock
hazard! ALWAYS UNPLUG THE AC ADAPTOR FROM THE AC POWER OUTLET WHEN THE S30 IS NOT
IN USE.
Connections
Connecting to External Audio Equipment
Since the synthesizer has no built-in speakers, you need to monitor its sound output via external
audio equipment. Alternatively, you could use a pair of headphones.
There are several methods of connecting to external audio equipment, as described in the following
illustrations.
Connecting Stereo Powered Speakers
A pair of powered speakers can accurately produce the instrument’s rich sounds with their own pan
and effect settings. Connect your powered speakers to the OUTPUT L/MONO and R jacks on the
rear panel.
When using just one powered speaker, connect it to the OUTPUT L/MONO jack on the rear panel.
S30
Headphones
PHONES OUTPUT
L/MONO OUTPUT R
INPUT
Powered speaker (Left) Powered speaker (Right)
MUSIC SYNTHESIZER
Modular Synthesis Plug-in System
INPUT
Rear panel
3.3VCARD THRU OUT IN TO HOST
HOST SELECT
PC-1PC-2
MIDIMac FOOT
SWITCH R
OUTPUT
L/MONOPHONES DC IN STANDBY
ON
FOOT
CONTROLLER
MIDI
2 DC IN
1 STANDBY
3 To electrical output