78
Voice Mode
Element Filter
You can set Filter parameters to change the tonal
characteristics of each Element. The following ten
screens are available.
FLT Type (Filter Type)
FLT HPF (High Pass Filter)
FLT Sens (Filter Sensitivity)
FEG VelSens (FEG Velocity Sensitivity)
FEG Time
FEG Level
FEG Release
FLT KeyFlw (Filter Key Follow)
FLT Scale (Filter Scale Break Point)
FLT Scale (Filter Scale Offset)
FLT Type (Filter Type)■Type
Set the Filter Type. Parameters will vary according
to the Type.
❏Settings:
LPF12+HPF (Low Pass Filter 12dB/oct + High Pass Filter),
LPF24D (Low Pass Filter 24dB/oct Digital),
LPF24A (Low Pass Filter 24dB/oct Analog),
LPF18 (Low Pass Filter 18dB/oct),
LPF18S (Low Pass Filter 18dB/oct Staggered),
LPF6+HPF (Low Pass Filter 6dB/oct + High Pass Filter),
HPF24D (High Pass Filter 24dB/oct Digital),
HPF12 (High Pass Filter 12dB/oct),
BPF6 (Band Pass Filter 6dB/oct),
BPF12D (Band Pass Filter 12dB/oct Digital),
BPFW (Band Pass Filter Wide),
BEF6 (Band Elimination Filter 6dB/oct)
THRU (Bypass)
Filters
To generalize, there are basically four types of filter: an LPF
(Low Pass Filter), an HPF (High Pass Filter), a BPF (Band
Pass Filter) and a BEF (Band Elimination Filter). Each
available filter has a different frequency response. There
are also combinations of LPF and HPF.
• LPF (Low Pass Filter):
This only passes signals below the Cutoff frequency. You
can then use the Reso (Resonance) parameter to add further
character to the sound. Six types of LPF are available.
FrequencyCutoff
Level
-6db/oct
-12db/oct
-18db/oct
-24db/oct
FLTíType) Type Gain Cutoff Reso
EL1234 LPF12+HPF 255 255 31
LPF24D (Low Pass Filter 24dB/oct Digital)
A 4-pole (-24db/oct) dynamic LPF with a strong Resonance.
LPF24A (Low Pass Filter 24dB/oct Analog)
A 4-pole (-24db/oct) dynamic LPF with a character similar
to those found on analog synthesizers.
LPF18 (Low Pass Filter 18dB/oct)
A 3-pole (-18db/oct) dynamic LPF.
LPF18S (Low Pass Filter 18dB/oct Staggered)
Also a 3-pole (-18db/oct) dynamic LPF, but with a
shallower frequency curve.
LPF12 (Low Pass Filter 12dB/oct)
A 2-pole (-12db/oct) dynamic LPF, designed to be used in
combination with an HPF (High Pass Filter).
LPF6 (Low Pass Filter 6dB/oct)
A 1-pole (-6db/oct) dynamic LPF with no Resonance,
designed to be used in combination with an HPF (High
Pass Filter).
Resonance
LPF18
LPF18S
Resonance
Resonance
Resonance