Basic components

1.Power trim and tilt switch

2.Remote control lever

3.Neutral interlock trigger

4.Neutral throttle lever

5.Main switch / choke switch

6.Engine stop lanyard switch

7.Throttle friction adjuster

EMU26190

Remote control lever

Moving the lever forward from the neutral position engages forward gear. Pulling the lever back from neutral engages reverse. The engine will continue to run at idle until the lever is moved about 35° (a detent can be felt). Moving the lever farther opens the throttle, and the engine will begin to accelerate.

1.Neutral “ ”

2.Forward “ ”

3.Reverse “ ”

4.Shift

5.Fully closed

6.Throttle

7.Fully open

EMU26201

Neutral interlock trigger

To shift out of neutral, first pull the neutral interlock trigger up.

1. Neutral interlock trigger

EMU26211

Neutral throttle lever

To open the throttle without shifting into either forward or reverse, put the remote control lever in the neutral position and lift the neutral throttle lever.

NOTE:

The neutral throttle lever will operate only when the remote control lever is in neutral. The remote control lever will operate only when the neutral throttle lever is in the closed position.

12