Operation

to allow operation in shallow water.

EWM00660

WARNING

● Place the gear shift in neutral before

setting up for shallow water cruising.

● Return the outboard motor to its normal position as soon as the boat is back in deeper water.

ECM00260

ZMU03453

CAUTION:

3.Push the power trim and tilt switch / pow- Do not tilt the outboard motor up so that er tilt switch “” (down) to lower the out- the cooling water inlet on the lower unit is

board motor to the desired position. above the surface of the water when set-

UP

ting up for and cruising in shallow water. Otherwise severe damage from overheating can result.

DN DN

ZMU01936

DN

ZMU03524

EMU28060

EMU28185

Procedure for power trim and tilt / power tilt models

1.Place the remote control lever / gear shift lever in neutral.

N

ZMU03525

2.Slightly tilt the outboard motor up to the desired position using the power trim and tilt switch / power tilt switch.

Cruising in shallow water

The outboard motor can be tilted up partially to allow operation in shallow water.

EMU28090

Power trim and tilt models / power tilt models

The outboard motor can be tilted up partially

38