E

EJU19020K

Submerged watercraft

If the watercraft is submerged or flooded with water, follow the procedure below and consult a Yamaha dealer as soon as possi- ble. Failure to do so may result in serious engine damage!

In an emergency:

1.Beach the watercraft and remove the stern drain plugs to drain the water from the engine compartment. (See page 3-10 for further instructions.) Remove the storage compartment drain plugs to drain the water from the storage com- partments.

2.Install the stern drain plugs and storage compartment drain plugs.

3.Disconnect the spark plug caps, and then remove the spark plugs.

CAUTION:

Do not connect the spark plugs to the spark plug caps.

4. Disconnect the fuel injector couplers.

CAUTION:

Cover the disconnected fuel injector couplers so that they do not get wet. If the couplers get wet, they could corrode, which could lead to poor connections.

5.Crank the engine for 5 seconds at wide open throttle. Repeat this step until all of the water in the cylinders has been expelled.

6.Spray a rust inhibitor such as Yamaha Stor-Rite Engine Fogging Oil into each spark plug hole for 5 seconds.

7.Crank the engine for 5 seconds at wide open throttle. Repeat this step several times.

5-8