E

EJU10730

Starting and boarding in shallow water

1.Do not start the engine in less than 60 cm (2 ft) of water. Put the watercraft in water that is deep enough, and then board the watercraft from the side or the rear.

2.Attach the engine shut-off cord to your left wrist, and then install the clip to the engine shut-off switch.

3.Grip the handlebars with both hands, place both feet on the floor of the foot- well, start the engine, and start off.

EJU10740

Starting from a dock

1.Board the watercraft from the side.

2.Attach the engine shut-off cord to your left wrist, and then install the clip to the engine shut-off switch.

3.Push the watercraft away from the dock, grip the handlebars with both hands, place both feet on the floor of the foot- well, start the engine, and start off.

3-24