Yamaha VX110 Pre-operationchecks, Pre-operationcheck list

E

EJU13460

Pre-operation checks

EJU13470

Pre-operation check list

Before operating this watercraft, perform the checks in the following check list. See the accompanying text in this chapter for details on how to perform the checks.

WARNING

If any item in the pre-operation check list is not working properly, have it inspected and repaired before operating the watercraft, otherwise an accident could occur.

ITEM	ROUTINE	PAGE
Engine compartment	Remove all seats to ventilate the engine compartment.	3-5
	Check for fuel vapors and loose electrical connections.
Bilge	Check for water and fuel and remove if necessary.	3-9
Stern drain plugs	Check for proper installation.	3-10
Throttle lever	Check that the throttle lever springs back smoothly.	3-12
Steering system	Check for proper operation.	3-12
Shift lever and reverse gate	Check for proper operation.	3-13
(VX110 Deluxe)
Fuel and oil	Check fuel and oil levels and add if necessary.	3-6, 3-7
	Check the hoses and tanks for leakage.
Water separator	Check for water and drain if necessary.	3-9
Battery	Check electrolyte level, battery terminal connections,	3-10
	breather hose connection, and battery condition.
Hood	Check that the hood is properly secured.	2-6
Seat	Check that the seat is properly secured.	2-5
Hull and deck	Check the hull and deck for cracks or other damage.	3-5
Jet unit	Check for debris and remove if necessary.	3-14
Fire extinguisher	Check condition and replace if necessary.	3-11
Engine shut-off cord	Check condition and replace if frayed or broken.	3-14
Switches	Check the start switch, engine stop switch, and engine	3-15
	shut-off switch for proper operation.
Cooling water pilot outlet	Check that water is discharged while the engine is run-	3-15
	ning and the watercraft is in the water.
Multifunction meter	Check for warning indications and proper operation.	3-15

NOTE:

Pre-operation checks should be made thoroughly each time the watercraft is used. This procedure can be completed in a short time. It is worth the time spent to assure safety and reli- ability.

3-4