E

3.Enter your four-letter code by pressing the “A/SET,” “B,” or “C” buttons in the right sequence.

NOTE:

If you do not press a button for more than 10 seconds, the display automatically turns off. This cancels the process of selecting the mode.

4.If the code entered is correct, the mode will change from the previous mode to either “START” or “LOCK.” Then the mode display and buzzer will operate for 2 seconds.

NOTE:

●Once you select a mode, the mode will not change unless you perform this mode selection sequence again.

●If the wrong code is entered, the mode display shows “ERROR” for 2 seconds and the buzzer will sound 5 times. Then the display returns to “COdE.”

EJU01225

Tachometer

The engine speed (r/min) is displayed by segments. Each segment indicates a 200 r/min increment.

2-23