E

EJU01195

Lubrication

WARNING

Do not spray flammable rust inhibitor products on engine surfaces while the engine is hot. The sprayed substance or propellants could catch fire.

1.Remove the spark plugs and pour approximately one tablespoon of oil into each cylinder.

2.Grease the spark plug threads and rein- stall the spark plugs.

3.Crank the engine within 3 seconds using the start switch.

4.Lubricate all cables such as the throttle, choke, and steering cables.

NOTE:

Use a Yamaha Power Cable Luber and Yamaha Lube-Zall to pressure lubricate the cables and purge out any moisture between the inner and outer cables.

5.Lubricate the areas of the watercraft specified under Lubrication points on page 4-16.

4-3