Getting started

Using the remote control

-STANDBY/ONVOLUMEIPUT +

Within 6 m (20 feet)

30˚ 30˚

Use the remote control within 6 m (20 feet) of the center system and point it toward the remote control sensor.

Notes

Be careful not to spill liquid on the remote control.

Be careful not to drop the remote control.

Do not leave the remote control in the following places:

hot or humid places, such as near a heater or in a bathroom

extremely cold places

dusty places

Installing the batteries

1 3

2

Notes

1 Take off the battery compartment cover.

2 Insert the 2 supplied batteries (AAA, R03, UM4) according to the polarity markings (+ and –) on the inside of the battery compartment.

3 Snap the battery compartment cover back into place.

If the effective operation distance of the remote control decreases considerably, replace the batteries with two new ones as soon as possible.

Do not use an old battery together with new one.

Do not use different types of batteries (for example, alkaline and manganese) together. Each type of battery has its own characteristics even if they are similar in shape.

If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.

Dispose of the batteries according to the regional regulations.

If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or clothing. Before inserting new batteries, wipe the compartment clean.

6 En

Page 10
Image 10
Yamaha YAS-70 owner manual Using the remote control, Installing the batteries