Yamaha YDP-140, YDP-160 Using Headphones, Using the Headphone Hanger (for YDP-160only)

Before Using the Digital Piano

Using Headphones

Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided.

You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.)

CAUTION

Do not listen to the instrument at a high volume level through headphones for a long period of time, or your hearing may be damaged.

Bottom of the keyboard

PHONES

Standard stereo phone plug

Using the Headphone Hanger (for YDP-160 only)

A headphone hanger is included in the package so that you can hang the headphones on this instrument. Install the headphone hanger using the included two screws (4 ⋅ 10mm) as shown in the ﬁgure.

CAUTION

Do not hang anything other than the headphones on the hanger. Otherwise, this instrument or the hanger may be damaged.

YDP-160/140Owner’s Manual 15

Contents

IMPORTANT — Check your power supply — (YDP-160) Introduction SPECIAL MESSAGE SECTION (for YDP-160) IMPORTANT NOTICE: ENVIRONMENTAL ISSUES: Battery Notice: Warning: SPECIAL MESSAGE SECTION (for YDP-140) SPECIFICATIONS SUBJECT TO CHANGE: NOTICE: ENVIRONMENTAL ISSUES: NAME PLATE LOCATION: Power supply Do not open Power cord (YDP-160) AC power adaptor(YDP-140) Power supply/Power cord/AC power adaptor Connections Maintenance Handling caution Using the bench (If included) Saving data Owner’s Manual (this book) Quick Operation Guide (separate sheet) Data List Trademarks: Tuning Transporting AWM Dynamic Stereo Sampling GH(Graded Hammer) keyboard and GHS(Graded Hammer Standard) keyboard with matte black keytops Listening to Songs Loaded from the Connecting the Digital Piano to a Transmitting Song Data between the [PHONES] [POWER] [STANDBY/ON] [DEMO/SONG] [METRONOME] [PEDAL] [AC IN] (YDP-160) MIDI [IN/OUT] [DC IN 12V] (YDP-140) Pedals Key Cover To open the key cover: To close the key cover: Music Rest To raise the music rest: Connecting the Power Cord (YDP-160) Connecting the Power Adaptor (YDP-140) Turning the Power On Setting the Volume Using Headphones Reference 1. Turn on the power 2. Start playing back a demo song 3. Select and play a demo song Demo Songs Adjusting the Volume 4. Stop the Voice demo 1. Select and play back a piano preset song. 2. Stop playback Select and play back a song Selecting a Song Playback Channel Selecting 1 + 2 song playback channels: Selecting all song playback channels: Selecting Voices Using the Pedals Adding Variations to the Sound – Reverb Layering Two Voices (Dual mode) Transposition Fine-tuningthe Pitch Using the Metronome Adjusting the Keyboard Touch (Touch Sensitivity) Audio recording and data recording Playing Back Recorded Performance Data About MIDI MIDI’s Capability An example of connecting this instrument to the USB port on a computer Connecting this instrument to the computer using a USB-MIDIinterface MIDI Transmit/Receive Channel Selection Local Control ON/OFF Program Change ON/OFF Control Change ON/OFF Loading Song Data from a Computer to the Digital Piano Backing up Data and Initializing the Settings Backing up data to ﬂash memory Initializing the settings BC-100Bench UX16 HPE-150 1. Attach (ﬁnger-tighten)C to D and E 2. Attach B 3. Securely tighten the screws on C that were attached in Step 4. Mount A 5. Secure A Voltage Selector After completing the assembly, please check the following Symbols Numerics Page Appendix YDP-160 CAUTION Explanation of Graphical Symbols IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (U.S.A.) NORTH AMERICA ASIA CENTRAL & SOUTH AMERICA EUROPE AFRICA