Yamaha YDP-140, YDP-160 2. Stop playback, Adjusting the Volume, Select and play back a song, Selecting a Song Playback Channel, Selecting all song playback channels:

Select and play back a song.

Listening to Songs Loaded from the Computer

Listening to Songs Loaded from the Computer

You can transfer song data from your computer to this instrument and play back the songs. (See page 32 for more information on loading song data from the computer.)

Procedure

1. Song numbers (1 through 10) are assigned to the D
6–C7 keys (see the illustra-

tion below).

While holding down the [DEMO/SONG] button, press one of the D 6–C7 keys to select a song to play back.

The selected song starts to play.

1st song	10th song
D 6	C7 (The highest key)

Adjusting the Volume

Use the [MASTER VOLUME] control to adjust the volume while listening to the song.

2. Stop playback.

To stop the song during playback, press the [DEMO/SONG] button.

Selecting a Song Playback Channel

If a song loaded from the computer uses a voice that is not supported by this instrument, the originally-assigned voice may not be reproduced accurately. In this case, switching the song playback channel from “All” to “1 + 2” may improve the tone to more natural sound.

Selecting 1 + 2 song playback channels:

While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the C7 key.

Channels 1 + 2 will produce the sound.

C7

The highest key

Selecting all song playback channels:

While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the B6 key.

All channels 1 through 16 will produce the sound.

You can load up to 10 songs or up to 337 KB of data from the computer.

Use the following table to write down the song titles you loaded from the computer.

Key	Song title
D 6
E6
F6
F 6
G6
G 6
A6
A 6
B6
C7

B6

The highest key

16

18YDP-160/140Owner’s Manual