Yamaha YDP-140, YDP-160 Adding Variations to the Sound – Reverb, Adjusting Reverb Depth

Adjusting Reverb Depth

Selecting & Playing Voices

Adding Variations to the Sound – Reverb

This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create a realistic acoustic ambience.

Procedure

While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to select a reverb type.

C
2 D
2

	The lowest key		C2 D2 E2
Key	Reverb Type		Description
C2	Room	This setting adds a continuous reverb effect to the sound, similar to
C 2		the acoustic reverberation you would hear in a room.
	Hall1	For a “bigger” reverb sound, use the HALL 1 setting. This effect simu-
		lates the natural reverberation of a small-size concert hall.
D2	Hall2	For a truly spacious reverb sound, use the HALL 2 setting. This effect
D 2		simulates the natural reverberation of a large concert hall.
	Stage	Simulates the reverb of a stage environment.
E2	Off	No effect is applied.

Adjust the reverb depth for the selected voice by pressing one of the C3–G
4 keys while holding down the [PIANO/VOICE] button. The depth range is from 0 through 20.

G
4: depth 20

The lowest key	C3: depth 0	A4
	The depth value increases as you press higher keys.

While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb to the depth most suitable for the selected voice.

The default reverb type (includ- ing OFF) and depth settings are different for each voice.

depth 0: no effect

depth 20: maximum reverb depth

19

YDP-160/140Owner’s Manual 21