Selecting & Playing Voices
Layering Two Voices (Dual mode)
You can layer two voices and play them simultaneously to create a thicker and more supple sound.
Procedure
1. Engage Dual mode.While holding down the [PIANO/VOICE] button, press two keys in the range of C1through A1
Refer to “Selecting Voices” (page 19) for information on the voices that are assigned to the keys.
The lowest key | C1 | F1 | A1 |
|
The voice assigned to the lower key will be designated as Voice 1, and the voice assigned to the higher key will be designated as Voice 2.
You can make the following settings for Voices 1 and 2 in Dual mode:
Setting the OctaveYou can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde- pendently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave.
While holding down the [PIANO/VOICE] button, press one of the
C5 F5
| C5 key: 0 (Voice 1), | The highest key |
C5 key: | D5 key: +1(Voice 1), | |
D5 key: | E5 key: 0 (Voice 2), | F5 key: +1(Voice 2) |
You can adjust the volume balance between two voices. For example, you can set one voice as the main voice with a louder setting, and make the other voice softer.
While holding down the [PIANO/VOICE] button, press one of the
A setting of “0” produces an equal balance between the two Dual mode voices. Settings below “0” increases the volume of Voice 2 in relation to Voice 1, and settings above “0” increases the volume of Voice 1 in relation to Voice 2.
F 5 C6 F6
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| +1 | +3 |
| +6 |
The highest key
2. Exit Dual mode and return to normal play mode.While holding down the [PIANO/VOICE] button, press one of the
You cannot assign the same voice to Voice 1 and Voice 2 simultaneously in Dual mode.
Reverb in Dual Mode
The reverb type assigned to Voice 1 will take priority. (If the reverb assigned to Voice 1 is set to OFF, the reverb assigned to Voice 2 will be in effect.)
20
22