Yamaha YSP-900 owner manual Connecting a DVD player/recorder, 16 En

CONNECTIONS

Connecting a DVD player/recorder

To connect a DVD player/recorder, connect the coaxial digital output jack on your DVD player to the coaxial digital input jack (DVD COAXIAL) on this unit.

If there is no coaxial digital output jack on your DVD player/recorder, use them with optical digital connection.

y

To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 14).

Notes

•Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.

•If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead.

DVD/VCR combo	DVD player/recorder
player/recorder

Video signal to a TV
	Analog audio				Coaxial digital
			output			output
		R		L

Video signal to a TV

Coaxial digital

output

Rear panel of this unit

VCR		TV/STB	SUBWOOFER VIDEO		TV/STB			AUX		DVD
	AUDIO INPUT					OPTICAL			COAXIAL
				OUT			DIGITAL INPUT

Cables used for connections

	Digital audio pin cable (supplied)	Audio pin cable
	(White)	(White)
(Orange)	(Orange)
	(Red)	(Red)

16 En